Dimension Adustable Quill Stems can be adjusted from 70130 degree rise. 3D forged 6061T6 aluminum Adustable stem from 70 to 130 degree rise Fourbolt front stem cap 180mm quill length with up to 108mm of usable height Stem Length: 85 or 100 mm Stem Angle: 70 deg to 130 deg Color: Black Bar Clamp Diameter: 25.4 mm . . .

Deda Elementi ZeroNero stems, carbon fiber and alloy working together each doing that part of the job which it does best. Pure design for performance. Carbon fiber with aluminum clamping 50mm height Stem Length: 90/100/110/120/130 mm Stem Angle: 82 deg Color: Black Bar Clamp Diameter: 31.7 Steerer Tube: 11/8 Thread . . .

The Prolite stem is in a league of its own, with Qwall technology. Extra material is used along the sidewalls of the extension tube to increase torsional stiffness without any reduction to vertical compliance, to ensure a smooth ride over rough roads while resisting the twisting load of climbing and sprinting. 7075 all . . .

The Profile Design Hammer OS Road Stems are constructed of 3D forged 6061T6 aluminum and fit 31.8mm handlebars. 31.8 handlebars 3D forged 6061T6 aluminum construction Shot peened and anodized finish for added strength and durability 80 degrees or 100 degrees REVERSIBLE rise or a 90 degrees rise 1 or 11/8 Threadle . . .

Light and stiff in 31.8 mm The new Syntace stem system applied to the 31.8 mm handlebar clamping dimension. If 31.8 mm ... is being used for the handlebar clamping diameter then the rest of the stem should be made as stiff and strong. A thicker stem tube is used, this 31.8mm diameter is kept throughout the stem to t . . .

Steerer Tube: 11/8 Threadless Headset Type: Integrated, 41.0mm OD, 45 degree bearing IS Color: Black Crown Race: 30.0 Stack Height: 8.7 mm Bearing Type: Sealed Cartridge Material: Aluminum Weight: 71 grams . . .

Profile Design Hammer Road Stems are constructed of 3D forged 6061T6 aluminum and can be used at 80 or 100 degrees. 3D forged 6061T6 aluminum construction Shot peened and anodized finish for added strength and durability Compatible with Lightning Stryke Aerobars with flip up pads. Fits AL6000 40mm Height 26.0 hand . . .

Deda Elementi ZeroNero stems, carbon fiber and alloy working together each doing that part of the job which it does best. Pure design for performance. Carbon fiber with aluminum clamping 50mm height Stem Length: 90/100/110/120/130 mm Stem Angle: 82 deg Color: Black Bar Clamp Diameter: 31.7 Steerer Tube: 11/8 Thread . . .

Profile Design Hammer Road Stems are constructed of 3D forged 6061T6 aluminum and can be used at 80 or 100 degrees. 3D forged 6061T6 aluminum construction Shot peened and anodized finish for added strength and durability Compatible with Lightning Stryke Aerobars with flip up pads. Fits AL6000 40mm Height 26.0 hand . . .

Profile Design Hammer Road Stems are constructed of 3D forged 6061T6 aluminum and can be used at 80 or 100 degrees. 3D forged 6061T6 aluminum construction Shot peened and anodized finish for added strength and durability Compatible with Lightning Stryke Aerobars with flip up pads. Fits AL6000 40mm Height 26.0 hand . . .

The FSA The Pig threadless headset is constructed of chromoly and features 1/4 ball bearings. Forged chromoly lower cup 12mm Deep Cup 6061/T6 upper cup Super oversized lower ball bearings Caged 5/32 ball upper bearings Forged chromoly crown race Gyro compatible Laser etched aluminum top cap 1 1/8 size only S . . .

The Profile Design Hammer OS Road Stems are constructed of 3D forged 6061T6 aluminum and fit 31.8mm handlebars. 31.8 handlebars 3D forged 6061T6 aluminum construction Shot peened and anodized finish for added strength and durability 80 degrees or 100 degrees REVERSIBLE rise or a 90 degrees rise 1 or 11/8 Threadle . . .

The Prolite stem is in a league of its own, with Qwall technology. Extra material is used along the sidewalls of the extension tube to increase torsional stiffness without any reduction to vertical compliance, to ensure a smooth ride over rough roads while resisting the twisting load of climbing and sprinting. 7075 all . . .

Light and stiff in 31.8 mm The new Syntace stem system applied to the 31.8 mm handlebar clamping dimension. If 31.8 mm ... is being used for the handlebar clamping diameter then the rest of the stem should be made as stiff and strong. A thicker stem tube is used, this 31.8mm diameter is kept throughout the stem to t . . .

Profile Design Hammer Road Stems are constructed of 3D forged 6061T6 aluminum and can be used at 80 or 100 degrees. 3D forged 6061T6 aluminum construction Shot peened and anodized finish for added strength and durability Compatible with Lightning Stryke Aerobars with flip up pads. Fits AL6000 40mm Height 26.0 hand . . .

The Profile Design Hammer OS Road Stems are constructed of 3D forged 6061T6 aluminum and fit 31.8mm handlebars. 31.8 handlebars 3D forged 6061T6 aluminum construction Shot peened and anodized finish for added strength and durability 80 degrees or 100 degrees REVERSIBLE rise or a 90 degrees rise 1 or 11/8 Threadle . . .